Uživatelské nástroje

Nástroje pro tento web

Historie:
en:sim:manual:menu_nastaveni:sit_a_cas

Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

Odkaz na výstup diff

Obě strany předchozí revizePředchozí verze
Následující verze		Předchozí verze
en:sim:manual:menu_nastaveni:sit_a_cas [2014/08/28 11:44] – jitkaen:sim:manual:menu_nastaveni:sit_a_cas [2018/06/01 14:18] (aktuální) – ondra
Řádek 1: Řádek 1:
 ===== Network and Time ===== ===== Network and Time =====
- 
- 
 ---- ----
- +This submenu enables setting the network and time.\\ 
- +
-This submenu enables setting the network, time and communication with subordinate portal.\\ +
 \\  \\ 
-{{  :en:sim:manual:menu_nastaveni:sit_a_cas.png?nolink&  }} +{{  .:sit_a_cas.png?direct  }}
- +
 ==== Network Setup ==== ==== Network Setup ====
- +**IP Address** \\ 
- +
-**IP address** \\ +
 Enter the IP address out of the range of network that Solar Monitor uses.\\  Enter the IP address out of the range of network that Solar Monitor uses.\\ 
 \\  \\ 
-**Network mask** \\ +**Network Mask** \\ 
 Enter the network mask corresponding to the Solar Monitor's network.\\  Enter the network mask corresponding to the Solar Monitor's network.\\ 
 \\  \\ 
-**Default gateway** \\ +**Default Gateway** \\ 
 Enter the local net address of a device that serves as default gateway to other nets. In local nets it is mostly ADSL modem or some kind of a router (e.g. WiFi router). Without the default gateway the unit won't have the internet access (functions Internet Time and Sending to the Portal won't work).\\  Enter the local net address of a device that serves as default gateway to other nets. In local nets it is mostly ADSL modem or some kind of a router (e.g. WiFi router). Without the default gateway the unit won't have the internet access (functions Internet Time and Sending to the Portal won't work).\\ 
 \\  \\ 
Řádek 32: Řádek 24:
  
  
-If your unit "disappears" in the network after you have switched on DHCP client, you can find it with ETool utility, which can be downloaded here +If your unit "disappears" in the network after you have switched on DHCP client, you can find it with ETool utility, which can be downloaded [[https://www.solarmonitor.cz/support/download/utilities|here]].
- +
- +
-==== Sending Data to the Portal ==== +
- +
- +
-**Sending permitted** \\  +
-You can permit this option once you have access to the portal. The unit will start sending data to the portal in preset interval.\\  +
-\\  +
-**Portal address** \\  +
-Enter the IP address or portal' s name that Solar Monitor unit should connect to (e.g. portal.solarmonitor.cz).\\  +
-\\  +
-**Service path** \\  +
-Enter exact location of SOAP service, that accepts data at the portal. Provider or portal administrator will provide this info.\\  +
-\\  +
-**Remote port** \\  +
-Enter the port that communicates with SOAP service at the portal.\\  +
-\\  +
-**Sending period** \\  +
-Set the time period of sending data to the portal. +
- +
- +
-==== Portal Communication Test ==== +
- +
- +
-When you press this button, a trial message is sent to the portal and you can check the status of delivery. Inverters are not included in testing packet. +
- +
 ==== Internet Time ==== ==== Internet Time ====
  
en/sim/manual/menu_nastaveni/sit_a_cas.1409219065.txt.gz · Poslední úprava: 2014/08/28 11:44 autor: jitka